Skip to main content

Storage Tank Selection

In my recent project, there are at least eight liquid storage tanks we need to design and purchase. Although, the design of storage tank is not part of my work (it is a job of mechanical engineers), but I always wonder how people design the tanks. In this post, I want to share to you the results of my desktop study about liquid storage tank selection.

Liquid Storage Tanks

There are six basic tank designs used for organic liquid storage tanks:

  1. Fixed roof (vertical and horizontal)
  2. External floating roof
  3. Domed external (or covered) floating roof
  4. Internal floating roof
  5. Variable vapor space
  6. Pressure vessel (low and high)

Fixed-Roof Tanks

http://www.ngm-group.ru/eng/fixed_roof_tanks_3/

Fixed-roof tank is the least expensive to construct and is generally considered the minimum acceptable for storing volatile organic liquids. This type of tank consists of a cylindrical steel shell with a permanently affixed roof, which vary in design.

Fixed-roof tanks are either freely vented or equipped with a pressure or vacuum vent. The latter prevents the release of vapors during very small changes in temperature, pressure, or liquid level.

External Floating Tanks

A typical external floating roof tank consists of an open- topped cylindrical steel shell equipped with a roof that floats on the surface of the stored liquid. The floating roof consists of a deck, fittings, and rim seal system. Floating decks that are currently in used are constructed of welded steel plate and are of two general types: pontoon or double-deck.

http://en.wikipedia.org/wiki/File:External_floating_roof_tank_(double_deck).jpg

 

 

http://www.fgg.uni-lj.si/kmk/esdep/master/wg15c/l0100.htm

 

 

An external floating roof tank is commonly used to store large quantities of petroleum products, such as crude oil or condensate. Unlike fixed-roof tank, there is no vapor space in the floating roof tank.

Domed External Floating Roof Tank

Domed external floating roof tank is typically an external floating roof tank that has been retrofit with a domed fixed roof. This type of tank is to an internal floating roof tank with a welded deck and a self supporting fixed roof.

http://www.petrolplaza.com/technology/articles/MiZlbiYxMDM4NyY0JjEmMyYxMjU%3D

 

 

 

 

 

 

 

 

 

Internal Floating Roof Tank

Internal floating roof tanks are used for liquids with low flash-points (i.e. gasoline, methanol). These tanks are cone roof tanks with a floating roof inside which travels up and down along with the liquid level. This floating roof traps the vapor from low flash-point fuels.

http://www.cpec.nus.edu.sg/myweb/newsletter/news10/MOM.html

 

 

 

 

 

 

 

 

 

Variable Vapor Space Tanks

Variables vapor space tanks are equipped with expandable vapor reservoirs to accomodate vapor volume fluctuations due to temperature and barometric pressure changes. The two most common type of varible vapor space tanks are lifter roof tanks and flexible diaphragm tanks.

Pressure Vessel (Low and High)

Two classes of pressure tanks are in general use: low pressure (2.5 to 15 psig) and high pressure (higher than 15 psig). Pressure tanks are generally used for storing organic liquids and gases with high vapour pressures, and are found in many sizes and shapes, depending on the operating pressure of the tank. Pressure tanks are equipped with a pressure/vacuum vent set to prevent venting loss from boiling and breathing loss from temperature or barometric pressure changes.

References:

  1. Liquid storage tank. http://www.mothersofeastla.com/web-content/citizengroup/AP42/ap42ch07.pdf
  2. Storage tank selection and sizing. http://kolmetz.com/pdf/EDG/ENGINEERING_DESIGN_GUIDELINE__storage_tank_rev_2.pdf
  3. External floating roof tank. http://en.wikipedia.org/wiki/External_floating_roof_tank
  4. http://www.ec.gc.ca/inrp-npri/default.asp?lang=En&n=5F8E5341-1

One thought to “Storage Tank Selection”

Leave a Reply